audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Checking radio/CD changer wiring > < Removing and installing CD changer R41

A2

Removing and installing
Removing and installing
–  Switch off all electrical equipment.
–  Remove ignition key.
Removing:
–  Remove rear right luggage compartment side trim → General body repairs, interior; Rep. Gr.70.
   
–  Screw out the four bolts -1- (8 Nm).
–  Unplug connector and take CD changer -2- out of luggage compartment together with mounting frame -3-.
Removal from mounting frame:
  A91-0397
–  Screw out bolts -2- (3 Nm).
Installing:
–  Install accordingly in reverse order of removal.
–  Following installation, always check wiring → Chapter.
  A91-0398

Checking radio/CD changer wiring > < Removing and installing CD changer R41