audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Adaption table > < Measured value block 006 up to MY 01

A2

Adaption
Adaption
The "Adaption" function as of MY 02 can be used to make and store the following changes:
t  Adaption of external tuner
Appropriate radio adaption is required in the event of additional connection of DAB or SDARS tuner (digital radio).
SDARS tuners are only used in North America.
t  Deactivating/activating GALA function
Speed-dependent volume control (GALA) can be activated or deactivated.
GALA function is activated at factory.
t  Deactivating/activating vehicle speed display
Vehicle speed display in radio display can be activated for driving school vehicles.
To obtain display of vehicle speed in radio display, MENU key must be pressed whilst switching on radio.
t  Activating/deactivating “long wave” band
Long wave reception can be activated for certain countries and on customer request.
t  Deactivating/activating transportation mode
Radio cannot be switched on if transportation mode is active.
Transportation mode may be active in new vehicles on delivery.
The individual functions are called up by way of the appropriate adaption channel number (adaption table → Chapter).
Procedure
–  Start radio self-diagnosis → Chapter.
   
Indicated on display:
–  Press keys 1 and 0 (“Adaption”).
  
Rapid data transfer                HELP
Select function XX
Indicated on display:
–  Confirm entry by pressing Q key.
  
Rapid data transfer                    Q
10 - Adaption
Indicated on display:
–  Enter required adaption channel (adaption table → Chapter).
–  Confirm entry by pressing Q key.
  Note
After altering adaption value or exiting from adaption channel, function “10 - Adaption” must be implemented again to select a different adaption channel.
  
Adaption
Enter channel number XX

Adaption table > < Measured value block 006 up to MY 01