Audi Workshop Service and Repair Manuals > A2 > Vehicle electrics | Radio, Telephone and Navigation System, Self-diagnosis | Self diagnosis, V.A.G Inspection Service | Telephone self-diagnosis | Adaption | Aerial test selection

Aerial test selection - Adaption channel 05

At present the GSM aerial cannot be tested. “0 = No test” must therefore be set.

Indicated on display:

–	Press keys 0 and 5 (“Channel 5”).

Note

An incorrect entry can be corrected after pressing C key.

–	Confirm entry by pressing Q key.

Adaption

Enter channel number XX

Indicated on display:

Channel selected and aerial test currently stored are displayed on top line.

0 = No test

1 = Testing of GSM aerial (cannot be used)

–	Press → key.

Channel 5     Adaption      1        ->

Test On

Indicated on display:

–	Enter new adaption value (e.g. 00000) if value currently stored is not “00000”.

–	Confirm entry by pressing Q key.

Channel 5     Adaption      1        ->

Enter adaption value XXXXX

Indicated on display:

–	Press → key.

Channel 5     Adaption      0         Q

Test Off

Indicated on display:

–	Confirm entry by pressing Q key.

Channel 5     Adaption      0         Q

Store altered value?

Indicated on display:

–	Press → key.

Channel 5     Adaption      0        ->

Altered value stored

Indicated on display:

–	Press keys 0 and 6 (“End of output”).

–	Confirm entry by pressing Q key.

Rapid data transfer                HELP

Select function XX

Audi Workshop Service and Repair Manuals