audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Customer Interest for Fuel Filter:|011118|Page 507 > < Alignment|Specifications
Page 1
background image

Fuel Filter: Customer Interest
Fuel System - No Start/Runs Rough/MIL ON/DTC P0087/P0088

01 MIL on, no start or rough running (DTC P0087 - Rail fuel pressure too low or DTC P0088 - Rail fuel pressure too high)

01 11 18 

2023360/2 

January 25, 2011. 

Supersedes Technical Service Bulletin Group 01 number 10 - 08 dated May 17, 2010 for the reasons listed below.

AFFECTED VEHICLES

CONDITION

^ MIL on.

^ DTC P0087 (Rail fuel pressure too low) or DTC P0088 (Rail fuel pressure too high) stored in ECM memory.

^ Excess rattling ("diesel clatter") coming from engine.

^ No start or hard starting condition.

^ Loss of power while driving due to fuel system contamination.

^ Contaminated fuel found in fuel system.

^ Rust or metal debris found in fuel system.

TECHNICAL BACKGROUND 

Contaminated or incorrect fuel can cause performance, drivability, and/or fuel delivery problems. Rust or metallic debris found in the fuel system
indicates a major component failure. Additional component replacement may be necessary to ensure no contamination or debris remains after repair.

Reasons for fuel contamination can include water ingress in the gas station's holding tanks, errors made in fuel transport, and incorrect fuel being
dispensed into the vehicle via the customer or service station (full service) employees.

Fuel system damage incurred by use of fuel not complying to ASTM-D-975 Grade 2 S15 (B5 or less biodiesel content) standards will not be covered
under warranty. Best practice in this situation is to have the repairs covered by the insurance company of the gas station selling the contaminated fuel.
This process can be initiated by vehicle owners contacting their own insurance company.

PRODUCTION SOLUTION 

Not applicable.

SERVICE

Customer Interest for Fuel Filter:|011118|Page 507 > < Alignment|Specifications