A3 L4-2.0L Turbo (BPY) (2006)
Tow Sensor: Service and Repair
Towing Recognition Control Module
Component location: in the back of the luggage compartment on the right side under the side trim.
Removing
-
If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or " Guided
Functions".
-
Select the function or path:
-
Follow further instructions on display of (VAS 5051B).
-
Remove luggage compartment right side trim => Body
Interior 70 Removal and Installation.
-
Disconnect electrical connectors - 2 - and - 3 -.
-
Release clip - arrow - and pull Towing Recognition Control Module (J345) - item 1 - out of mounting frame.
Installing
Install in reverse order of removal, noting the following:
-
Install luggage compartment right side trim => Body
Interior 70 Removal and Installation.