A3 L4-2.0L Turbo (BPY) (2006)
Lid lock, removing
-
Rear lid trim removed.
-
Operating rod to actuator removed.
-
Remove hex nuts - 3 - and remove lid lock - 2 - from lid - 1 -.
-
When installing, tighten nuts to 21 Nm.
Actuator, removing
-
Disconnect electrical connectors.
-
Operating rod - 2 - disengaged at lid lock.
-
Loosen bolts - 5 - and slide actuator - 1 - with mounting plate - 3 - out of elongated holes in rear lid.
-
Remove actuator with mounting plate - 3 - from lid.
-
Remove screws - 4 - and remove actuator.
-
To remove, pivot operating rod - 2 - 90 degrees out of clip in opposite - direction of arrow -.