A3 L4-2.0L Turbo (BPY) (2006)
Cross-Member: Service and Repair
Console, Removing and Installing
Console, removing and installing
Special tools, testers and auxiliary items required
^
Torque wrench V.A.G 1332
Removing
-
Remove wheel.
-
Remove sound insulation.
-
Remove subframe.
-
Remove sensor in vehicles with automatic vertical headlight aim control (only installed on left side of vehicle).
-
Remove control arm with mounting bracket.
-
Remove bolt - 9 - for right side of vehicle or bolt - 18 - for left side of vehicle
-
Remove console.
Installing
Installation is in reverse order of removal. Note:
-
Tightening torques.
-
Perform basic setting of headlights for vehicles with automatic vertical headlight aim control.
-
Perform vehicle alignment.
-
Install sound insulation and tighten.