A3 L4-2.0L Turbo (BPY) (2006)
-
Equipment-depending with or without lighting
Removing
-
Unclip switch trim - 4 -.
Cupholder without lighting:
-
Open cupholder - 3 -.
-
Press clips - arrows - down with a flat screwdriver.
-
Remove cupholder - 3 - from upper center console - 1 -.
Cupholder with lighting:
-
Switch off all electrical consumers.
-
Remove ignition key.
-
Open cupholder - 3 -.
-
Press clips - arrows - down with a flat screwdriver.
-
Remove cupholder - 3 - from upper center console - 1 - as far as possible.
-
Disconnect electrical connector.
Installing
Installation is reverse of removal.
4
-
Switch trim
-
clipped in