A3 L4-2.0L Turbo (BPY) (2006)
Console: Service and Repair
Mount With Cigarette Lighter and Cover, Removing and Installing
Mount With Cigarette Light and Cover, Removing And Installing
Removing
-
Switch off all electrical consumers.
-
Remove ignition key.
-
Remove Function Selector Switch II E272 - item 6 -.
-
Remove center console.
-
Disconnect electrical connector on cigarette lighter.
-
Rotate center console.
-
Unclip connector - 4 - from U-shaped clip.
-
Remove bolts - 5 -.
-
Remove mount with cigarette lighter and cover - 3 - from center console - 1 -.
Installing
Installation is reverse of removal, but note the following:
-
Ensure connector - 4 - is connected opposite direction of travel.
-
Secure connector - 4 - in center console with U-shaped clip - 2 -.
Tightening torque
Component
Nm
Mount with cigarette lighter and cover to
center console
1.5