A3 L4-2.0L Turbo (BPY) (2006)
![background image](/audi/a3/l4-2.0l_turbo_(bpy)/Page-6055001.png)
Console: Service and Repair
Parking Brake Trim, Removing and Installing
Parking Brake Trim, Removing And Installing
Removing
-
Fold back center armrest.
-
Engage parking brake until lever is at an angle of - a - = 20 degrees.
-
Guide a flat-head screwdriver - 3 - through hole and press tab - 2 - upward with it.
-
Remove handle - 1 - forward from parking brake lever.
-
Beginning at top, remove right trim - 3 - and left trim - 4 - in - direction of arrow - from parking brake lever.
-
Using a flat-head screwdriver, pry press button - 1 - from parking brake lever - 2 -.
Installing
Installation is reverse of removal, but note the following:
-
Maintain the following assembly sequence:
-
Install left and right trim.
-
Install handle.
-
Install press button.
-
Ensure the various attachments engage audibly.