A3 L4-2.0L Turbo (BPY) (2006)
/Page-6057001.png)
Console: Service and Repair
Rear Central Locking Switch Mount (Country-Specific Versions), Removing and Installing
Rear Central Locking Switch Mount (Country-Specific Versions), Removing And Installing
Removing
-
Switch off ignition and remove ignition key.
-
Open ashtray cover.
-
Remove rear ashtray - 2 - from center console.
-
Remove switch mount - 1 - on upper edge in - direction of arrow - from locking mechanism.
-
Disengage switch mount at lower edge.
-
Disconnect electrical connector - 1 -
-
Release retaining clips in - direction of arrow - and remove switch - 2 - from mount.
Installing
Installation is reverse of removal.