A3 L4-2.0L Turbo (BPY) (2006)
1
-
Lower A-pillar trim panel
Removing
-
Remove instrument panel cover.
-
Remove lower A-pillar trim - 1 - from clip - 9 -.
-
Remove lower A-pillar trim - 1 - from door sill molding - 8 - and plastic bracket - 6 -.
Installing
Installation is reverse of removal, but note the following:
NOTE: Replace damaged spring clips - 7 - and - 9 -.
-
Before installing lower A-pillar trim - 1 -, ensure spring clip - 7 - is positioned correctly.
-
When installing, ensure lower A-pillar trim tab - 1 - and door sill molding tab - 8 -engage.
-
After completing installation, stretch door sealing profile over lower A-pillar trim.
2
-
Bracket
3
-
Screws - 2.5 Nm
-
Qty. 2
4
-
Floor covering
5
-
Nut - 3 Nm
6
-
Plastic bracket
7
-
Clip
-
Replace if damaged
8
-
Sill panel trim
9
-
Clip
-
Replace if damaged