A3 L4-2.0L Turbo (BPY) (2006)
![background image](/audi/a3/l4-2.0l_turbo_(bpy)/Page-6164005.png)
-
Remove selector lever cover upward - arrows -.
To install, perform the steps used in removal in reverse order.
Version II: Selector Lever Boot and Cover, Removing and Installing
-
Unclip selector lever boot - 1 - on both sides and remove upward - arrows -.
-
Grasp through opening and remove cover - 1 - upward - arrows -.
-
Disconnect electrical connector.
To install, perform the steps used in removal in reverse order.
Omega Clips, Installation Location