A3 L4-2.0L Turbo (BPY) (2006)
Seat Back: Removal and Replacement
Backrest Adjustment Hand Wheel
Backrest Adjustment Hand Wheel
Removing
-
Press side panel - 2 - lightly in direction of backrest.
-
Slightly lift and disengage retaining detent - 1 - using a screwdriver.
-
Turn backrest adjustment hand wheel - 3 - and disengage another retaining detent.
-
Remove hand wheel for backrest adjustment.
Installing
Installation is reverse of removal, but note the following:
-
Hand wheel must be pressed on until it audibly engages.
‹› If the hand wheel for backrest adjustment sits loosely on the adjustment shaft, the hand wheel for backrest adjustment must be replaced.