A3 L4-2.0L Turbo (BPY) (2006)
‹› Steering Angle Sensor (G85)
‹› Sensor for transverse acceleration (G200)
‹› Brake Pressure Sensor 1 (G201)
‹› Longitudinal Acceleration Sensor (G251) (only equipped on all-wheel drive vehicles)
‹› Afterwards, the ESP driving and system tests must be performed.
For this, use the Diagnostic Operation System (VAS5051A).
-
Connect Diagnostic Operation System (VAS5051A ) and select function tests using "Functions/Component selection " => [ VAS 5051A,
Connecting and Selecting Functions ] See: Testing and Inspection.
-
"Suspension"
-
"Brake System"
-
"01- On Board Diagnostic (OBD) capable systems"
-
"J104- ABS/ASR/ESP Control Module Mark 60si"
-
"J104- ABS/ASR/ESP Control Module, Functions"
‹› By performing the output check diagnosis, it can be determined if the line connections were interchanged.
Tightening specifications
*
Replace bolts
*
For M10 and M12 connections