A3 L4-2.0L Turbo (BPY) (2006)
/Page-1688005.png)
-
Replace guide frame screws.
-
Gently tighten bolts from inside working toward outside in several stages.
-
Tighten bolts in several stages in tightening sequence => [ Guide frame tightening sequence ] See: Service and Repair/Valvetrain Assembly
Overview.
‹› Ensure guide frame is not tilted.
-
Then check TDC position of camshafts by inserting Camshaft Clamp (T10252) as far as stop.
