A3 L4-2.0L Turbo (BPY) (2006)
-
Loosen the cap -2- with Socket AF 32 .
Note:
-
Loosen the cap before draining / extracting, so that the engine oil can run out of the oil filter housing.
-
Open oil drain plug or extract engine oil.
-
Replace O-rings and oil filter insert.
Note:
-
Observe waste disposal regulations!
-
Tighten cap with Socket AF 32 .
-
Install the vacuum shut-off valve -1- into its retainer.
-
Install oil drain plug with new gasket.
-
Fill with engine oil.
Tightening Specifications
Oil drain plug .......................................................................................................................................................................................................... 30 Nm
Cover ....................................................................................................................................................................................................................... 25 Nm
3.2L MPI
-
To drain oil, remove noise insulation on drain plug. See: Body and Frame/Sound Proofing / Insulation/Service and Repair