A3 L4-2.0L Turbo (BPY) (2006)
![background image](/audi/a3/l4-2.0l_turbo_(bpy)/Page-1788004.png)
-
Disconnect crankcase ventilation pipe - 1 -.
-
Remove Ground (GND) cable - 2 - for oil pressure switch.
-
Remove bolts - arrows - and oil filter bracket.
Installing
Installation is in reverse order of removal, note the following:
‹› Tightening specifications => [ Oil Filter Bracket Assembly Overview ] See: Oil Filter Bracket Assembly Overview
‹› Always replace gaskets and seals.
‹› Secure all hose connections using hose clamps appropriate for the model type.
-
Install oil baffle => [ (Item 13) Oil baffle ] See: Oil Filter Bracket Assembly Overview
-
Fill with coolant => [ Cooling System, Draining and Filling ] See: Cooling System/Service and Repair/Procedures.