A3 L4-2.0L Turbo (BPY) (2006)
/Page-1836004.png)
-
Remove coolant expansion tank - arrows -.
-
Disconnect coolant pipe - arrow -.
-
Remove ribbed belt and remove Locking Pin (T10060A ) => [ Ribbed Belt ] See: Drive Belts, Mounts, Brackets and Accessories/Drive
Belt/Service and Repair/Ribbed Belt.
-
Install engine support bridge (10 - 222 A) onto fender bolting edge. The spindles are positioned forward.
-
Hook carabiner hooks of the spindles with shackles (10 - 222 A /12) into lifting eyes.