A3 L4-2.0L Turbo (BPY) (2006)
-
Mark rotational direction of toothed belt.
-
Loosen tensioning roller and remove toothed belt.
-
Then, turn crankshaft back slightly.
Installing
‹› Tightening specifications => [ Toothed Belt Drive Assembly Overview, without Divided Toothed Belt Guard ] See: Toothed Belt Drive Assembly
Overview, without Divided Toothed Belt Guard
‹› When turning camshaft, crankshaft must not be at TDC. Valves and/or pistons may be damaged.
‹› The engine must be no more than warm to touch.
-
Place toothed belt onto the crankshaft sprocket (observe direction of rotation).
-
Secure lower toothed belt guard with the two lower bolts.
-
Install vibration damper/belt pulley with new bolts.
-
Set crankshaft and camshaft to TDC at cylinder 1 - arrows -.