A3 L4-2.0L Turbo (BPY) (2006)
Timing Cover: Service and Repair
Rear Sealing Flange, Removing and Installing
Rear sealing flange, removing and installing
Special tools, testers and auxiliary items required
^
Hand drill with plastic brush attachment
^
Protective glasses
^
Sealant
Removing
^
Transmission removed
-
Remove dual-mass flywheel.
-
Unhook intermediate plate at sealing flange and at alignment sleeves - arrows -.
-
Remove bolts - 1 to 8 -.
-
Pull off rear sealing flange.
Installing
^
Tightening torques refer to Cylinder block, transmission side
Note: Place a rag over open part of oil pan.
-
Carefully remove any sealant residue from cylinder block and oil pan.
-
Clean sealing surfaces, they must be free of oil and grease.