A3 L4-2.0L Turbo (BPY) (2006)
-
Air distribution shafts of A/C Control Module ( J301) - C - can be slid into mounts of base plate - D - only in one position, therefore turn rotary
switch - B - for as long until position of both shafts align with position of shaft mounts in base plate.
-
Locking mechanisms of adjusting lever - D - and - F - are installed in base plate of heater controls - A - (for production, so that setting is not
offset during delivery), these locking mechanisms are released via pin - C - (for air distribution) and - E - (for temperature setting, only on version
for vehicles without A/C system) of Heater Control Module (J65) (A/C Control Module (J301)) - B - when connecting. If pins - C - (and - E - on
version for vehicles without A/C system) are not inserted correctly, the corresponding rotary switch can only be moved with difficulty or makes
clicking sounds when turning.