A3 L4-2.0L Turbo (BPY) (2006)
/Page-6983002.png)
-
Release spring clips - 2 - and - 4 - and remove gas-discharge lamp - 1 - from housing.
‹› Ignore the - arrow -.
Installing
Install in reverse order of removal, observing the following:
-
Insert the new HID bulb into the housing without touching the bulb with bare hands.
‹› Observe installation position: Electrical connection must face downward.
-
Secure gas-discharge lamp with spring clips.
-
Connect harness connector and close housing cover.
-
Secure housing cover using wire clamp.
-
Install the engine compartment E-box => [ Left Engine Compartment E-Box, through 05.2008 ] See: Maintenance/Fuses and Circuit
Breakers/Fuse Block/Service and Repair/Left Engine Compartment E-Box, Through 05.2008.
-
Connect battery. Actions to be taken:
‹› Battery in engine compartment => See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Battery, Engine
Compartment, Disconnecting and Connecting
‹› Battery in luggage compartment => See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Battery, Luggage
Compartment, Disconnecting and Connecting
