A3 L4-2.0L Turbo (BPY) (2006)
Timing Belt: Service and Repair
Toothed Belt, with Divided Toothed Belt Guard
Toothed Belt, with Divided Toothed Belt Guard
‹› Vehicles from 01/2006 have a new toothed belt guard. Identification: The upper toothed belt guard does not have cover => [ (Item 25) Cover for
toothed belt guard ] See: Toothed Belt Drive Assembly Overview, without Divided Toothed Belt Guard and guard is divided in engine bracket
area. Toothed belt, vehicles without divided toothed belt guard, removing and installing => [ Toothed Belt, without Divided Toothed Belt Guard ]
See: Toothed Belt, Without Divided Toothed Belt Guard.
Special tools, testers and auxiliary items required
‹› Engine support bridge (10 - 222 A)
‹› Shackle (10 - 222 A /12)
‹› pin wrench (T10020)
‹› Drift (T10060A)
Removing
-
Remove engine cover and air filter. See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair
CAUTION!
Cover cap of expansion tank with rag and open carefully, as hot steam or hot coolant may escape when opening.
-
Open cap of coolant expansion tank.
-
Remove noise insulation
-
Remove right noise insulation fasteners - 1 to 3 -.
-
Remove bolts - 1 to 3 - and pendulum support.