A3 L4-2.0L Turbo (BPY) (2006)
CAUTION!
Before handling pyrotechnic components (e.g. disconnecting the electrical connector), the person handling it must "discharge static
electricity ". This can be done by touching door striker, for example.
-
Remove bolts - 1 - and - 5 - on rear side airbag - 4 -.
-
Remove side airbag slightly from body.
-
Press securing flap - 2 - in - direction of arrow - and disconnect electrical connector - 3 - on side airbag.
-
Remove rear side airbag.
Installing
CAUTION!
‹› Follow the safety precautions for pyrotechnic components.
‹› Before handling pyrotechnic components (e.g. connecting the electrical connector), the person handling it must "discharge static
electricity ". This can be done by touching door striker, for example.
Installation is reverse of removal, but note the following:
-
Slide foam piece - 4 - to side.