A3 L4-2.0L Turbo (BPY) (2006)
![background image](/audi/a3/l4-2.0l_turbo_(bpy)/Page-5212002.png)
1
Cable Guide
‹› The wire must be routed on the side opposite the airbag module.
2
Replacement Airbag Wiring Harness
‹› It must be ensured that the wire cannot be rubbed or pinched when the seat is adjusted.
3
Felt
‹› Is contained in the repair kit.
‹› Should prevent damage to the replacement airbag wiring harness.
-
Secure cable guide - 1 - with a felt strip on seat frame.
4
Cable Guide Openings
-
Secure replacement airbag wiring harness in backrest cable guide openings.
5
Bolt
‹› for securing replacement airbag wiring harness ground connection - 9 -
‹› 10 Nm
6
Airbag Module Connector (Series Production Wiring Harness)
-
Remove series production wiring harness connector.