A3 L4-2.0L Turbo (BPY) (2006)
-
Engage tab on belt roller/belt tensioner in cut-out on side panel - 2 -.
Connector and connector lock, disconnecting from or connecting to belt roller/belt tensioner
CAUTION!
Before handling pyrotechnic components (e.g. disconnecting the electrical connector), the person handling it must "discharge static
electricity ". This can be done by touching door striker, for example.
Removing:
-
Open lock - 1 - on connector - 2 - with a flat-head screwdriver.
-
Remove connector - 2 -.
Installing:
-
Connect connector - 2 - as far as stop in belt roller/belt tensioner - 4 -.
-
Press connector lock - 1 - as far as stop into connector - 2 -.
3
Belt webbing
‹› If Airbag Malfunction Indicator Lamp (MIL) (K75) indicates a fault after installation, DTC memory must be checked, deleted and checked again.