A3 L4-2.0L Turbo (BPY) (2006)
Power Door Lock Switch: Service and Repair
Front Central Locking Switch, Removing and Installing
Front Central Locking Switch, Removing And Installing
Special tools, testers and auxiliary items required
-
Trim removal wedge 3409
Removing
-
Switch off ignition and remove ignition key.
-
Carefully remove cover - 1 - from retaining clips - arrow - with Trim Removal Wedge 3409.
-
Release retaining clips - arrows - and carefully remove central locking switch - 1 - from drivers side door trim.
-
Disconnect electrical connector.
Installing
Installation is reverse of removal, but note the following:
-
Press central locking switch into switch mount until retaining hooks engage.