A3 L4-2.0L Turbo (BPY) (2006)
/Page-1275001.png)
Ride Height Sensor: Removal and Replacement
Rear Suspension (FWD)
Level control system sensor in vehicle, replacing
Special tools, testers and auxiliary items required
^
Torque wrench V.A.G 1331
Removing
-
Disconnect harness connector - 1 -.
-
Remove bolts - 2 - and - 3 -.
-
Remove sensor.
Installing
Installation is performed in reverse order of removal. Note:
Sensor lever must face vehicle exterior.
-
After replacing, perform basic setting of headlights.
