A3 L4-2.0L Turbo (BPY) (2006)
![background image](/audi/a3/l4-2.0l_turbo_(bpy)/Page-1375001.png)
Power Window Safety Switch: Service and Repair
Driver Side Window Regulator Switch
Driver Side Window Regulator Switch
Removing
-
Switch off ignition and remove ignition key.
-
Remove door trim. Refer to => [ Front Door Trim ].
-
Remove armrest. Refer to => [ Armrest ]. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and
Repair/Front Door Trim/Armrest
-
Release retaining hooks on armrest side by pressing on retaining bar - arrows -.
-
Carefully release retaining hooks - 2 - and - 3 - on trim side with a small screwdriver.
-
Remove window regulator switch - 1 - downward out of switch mount.
Installing
Installation is reverse of removal, but note the following:
-
Press window regulator switch into switch mount until retaining hooks engage.
-
Install armrest. Refer to => [ Armrest ]. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and
Repair/Front Door Trim/Armrest
-
Install door trim. Refer to => [ Front Door Trim ].