A3 L4-2.0L Turbo (BPY) (2006)
Power Window Switch: Service and Repair
Passengers Side Window Regulator Switch, Removing and Installing
Passengers Side Window Regulator Switch, Removing And Installing
Removing
-
Switch off ignition and remove ignition key.
-
Remove door trim.
-
Remove insulation from door trim.
-
Disconnect electrical connector - 1 -.
-
Carefully release retaining hooks - arrows - with a small screwdriver.
-
Remove window regulator switch - 2 - downward out of switch mount.
Installing
Installation is reverse of removal, but note the following:
-
Press window regulator switch into switch mount until retaining hooks engage.
-
Install door trim.