A3 L4-2.0L Turbo (BPY) (2006)
![background image](/audi/a3/l4-2.0l_turbo_(bpy)/Page-3937004.png)
Attaching brass pin contact to fiber optic cable
-
Open securing lever on Crimping Pliers For Fiber-optic Cable VAS 6223/2 -arrow 1- and -arrow 2-.
-
Insert brass pin contact -1- in mount.
-
Close securing lever on Crimping Pliers For Fiber-optic Cable VAS 6223/2 -arrow-.
-
Slide fiber optic cable -2- into brass pin contact -1- as far as spring-loaded stop.
-
Slide fiber-optic cable further in up to fixed stop and close Crimping Pliers For Fiber-optic Cable VAS 6223/2.
-
Open Crimping Pliers For Fiber-optic Cable and remove fiber-optic cable with brass pin contact.
CAUTION: Do not excessively bend or kink fiber optic cables. (min. bending radius 25 mm).
-
Check proper attachment of brass pin contact -2- to fiber optic cable -1-.
-
4 crimp points must be visible at brass connection pin.
-
The brass pin contact must not be able to be removed by hand from fiber-optic cable.