A3 L4-2.0L Turbo (BPY) (2006)
Suspension Control Module: Service and Repair
Electronic Damping Control Module
Removing
The electronic damping control module is installed under the passenger seat.
-
Remove the passenger seat.
-
Remove sill panel.
-
Carefully fold the carpet up.
-
Unclip and remove the control module - 1 - from the retainer - arrows -.
-
Disconnect connector - 2 - from the control module - 1 -.
Installing
Installation is reverse order of removal, noting the following:
-
Install back part of the control module - 1 - under the housing corners - 3 - and - 4 - under the bracket and then attach the front part into the clips -
arrows -.
-
If the electronic damping control module is replaced, the control position must be reprogrammed.