A3 L4-2.0L Turbo (BPY) (2006)
/Page-4633003.png)
-
Remove pendulum support from transmission, remove bolts - 14 - to do so.
-
Place engine/transmission jack (VAG 1383 A) below subframe.
-
Place a block of wood - 1 - between engine/transmission jack (VAG 1383 A) and subframe.
-
Loosen bolts - 4 and 5 - and lower subframe with brackets slightly. Observe electrical wires when doing this.
-
Remove stabilizer bar - 1 - toward the front, over bracket - 2 - and down from the subframe.