A3 L4-2.0L Turbo (BPY) (2006)
Loosen dust cap from seat by tapping lightly on claw of Grease cap puller VW 637/2.
-
Press off dust cap.
-
Remove brake carrier with brake caliper and hang on body with tie wire.
Note:
^
Do not allow brake caliper to hang on brake hose.
-
Remove Phillips-head screw for brake disc and remove brake disc.
-
Remove socket head bolt using SPECIAL TOOL.
-
Remove wheel bearing unit from stub axle.
Installing
Installation is in reverse order of removal. Note:
-
Carefully slide wheel hubs/wheel bearing unit onto stub axle.
Make sure that wheel hubs/wheel bearing unit is not canted!
-
Use new socket head bolt and tighten as specified.
Note:
^
First, tighten bolt to specified tightening torque using torque wrench.
^
Use rigid wrench for additional tightening torque.