A3 L4-2.0L Turbo (BPY) (2006)
Wheels: Removal and Replacement
Metal valve body, removing and installing
Special tools, testers and auxiliary items required
^
Torque wrench V.A.G 1410
-
Place metal valve with rubber seal through rim from inside.
-
Position beveled washer and union nut from outside and tighten.
-
Secure against turning with counter hold - 1 - (e.g. drill bit diameter 2 mm.)
-
Press wheel electronics - 1 - into bed and fasten at rear of valve with microencapsulated bolt.