A3 L4-2.0L Turbo (BPY) (2006)
‹› Before removing filter housing from transmission, tip it slightly in its seating. This allows oil to flow back into transmission from filter housing.
-
Slowly lift the transmission fluid filter upward and off.
‹› There is an O-ring in the filter suction collar. Make sure the O-ring does not remain stuck in the transmission (remove the old O-ring if necessary).
Installing
Install in reverse sequence; note the following points:
Torque specifications: => [ Transmission Oil Cooler and Filter Assembly Overview ] See: Transmission Cooler/Service and Repair/Transmission Oil
Cooler and Filter Assembly Overview
-
Replace transmission fluid filter.
-
Coat O-ring in the intake collar on the new filter with transmission fluid before inserting it into the transmission.
-
Install transmission fluid filter with the seat facing downward - arrow -.
-
Coat O-ring on the filter housing with transmission fluid and install the filter housing.