A3 L4-2.0L Turbo (BPY) (2006)
-
Do not jam lines when installing oil pan.
-
Install 5 new oil pan bolts - arrows - in a diagonal sequence and in steps.
-
Install air guides with connector coupling => Engine
Mechanical 10 Removal and Installation.
-
Connect the connector of the Direct Shift Gearbox (DSG) Mechatronic (J743) and engage the retainer by turning.
-
Fill transmission fluid and check transmission fluid level => [ Transmission Oil, Draining, Changing and Filling ] See: Fluid - A/T/Service and
Repair/02E Transmission/Transmission Oil, Draining, Changing and Filling.
-
Observe procedures for connecting battery => Electrical
Equipment 27 Removal and Installation.