A3 L4-2.0L Turbo (BPY) (2006)
Shifter A/T: Overhaul
Selector Lever Scale Illumination L101, Removing and Installing
Selector Lever Scale Illumination L101, removing and installing 02E, 6 Speed Direct Shift FWD A/T
Removing
-
Place selector lever in position "N".
-
Switch off ignition and remove ignition key.
-
Unclip mounting frame for selector lever boot - 1 - from center console and lift it upward and off - arrows -.
-
Flip selector lever boot upward.
-
Unclip cover frame for selector lever - 1 - from center console and lift it upward and off -arrows -.
-
Remove selector lever cover.
-
Disconnect electrical connector.
-
Release retaining springs - arrows - and remove trim frame with Selector Lever Scale Illumination L101 - 2 - from selector lever cover - 1 -.
Installing
Installation is in reverse order of removal.