A3 L4-2.0L Turbo (BPY) (2006)
Shifter A/T: Removal and Replacement
Selector Lever Scale Illumination
Selector Lever Scale Illumination
Removing
-
Place selector lever in position "N".
-
Switch off ignition and remove ignition key.
-
Unclip mounting frame for selector lever boot - 1 - from the center console and lift it upward and off - arrows -.
-
Flip selector lever boot upward.
-
Unclip cover frame for the selector lever - 1 - from the center console and lift it upward and off - arrows -.
-
Remove selector lever cover.
-
Disconnect electrical connector.
-
Release retaining springs - arrows - and remove trim frame with the selector lever scale illumination (L101) - 2 - from selector lever cover - 1 -.