A3 L4-2.0L Turbo (BPY) (2006)
-
Disconnect exhaust system at clamping sleeve - 1 -.
-
Remove bracket for exhaust system - arrows -.
-
Tie up the front exhaust pipe to the floor panel.
-
Remove rear crossmember for vehicle floor, nuts - 1 and 2 -.
‹› To remove the rear section of the exhaust system, a second technician will be required.
-
Disengage exhaust system at retaining loops - arrows -.
-
Detach rear muffler on retaining loops and remove rear part of exhaust system.
-
Loosen clips - arrows - and remove heat shield.