A3 L4-2.0L Turbo (BPY) (2006)
Clutch Pedal Assembly: Removal and Replacement
Over-Center Spring
Over-Center Spring
Special tools, testers and auxiliary items required
‹› Assembly Tool (T10178)
‹› Grease (G 000 450 02)
Removing
‹› Mounting bracket for clutch pedal installed in vehicle.
-
Move driver seat toward the rear.
-
Remove the driver side storage compartment.
-
Remove bolt - arrow A - and remove left front footwell vent - 1 -.
-
Unclip wiring guide behind footwell vent - 1 - and lay aside.
-
Remove the crash brace - 2 - (if equipped) - depending on the design, it is attached by one or two bolts - arrows B -.
-
Remove clutch pedal - 1 - from mounting bracket - 3 -, remove nut - 2 - and pull out bolt - 5 - to do so.