A3 L4-2.0L Turbo (BPY) (2006)
‹› The over-center spring mounting cup - arrow - must be vertical.
-
Insert clutch pedal pressure pins - A - in over-center spring mounting cup - arrow -.
-
Press on clutch pedal slightly, push bolt through and tighten self-locking nut.
-
Install the crash brace, if equipped. Refer to => [ Crash Brace - Tightening Specification ] See: Pedal Assembly and Clutch Master Cylinder
Assembly Overview.
-
Install the left front footwell vent.
-
Install the driver side storage compartment.