A3 L4-2.0L Turbo (BPY) (2006)
Pressure Plate: Procedures
Differentiation of Clutch Manufacturers
Differentiation of clutch manufacturers 02Q, 6 Speed FWD M/T
A clutch could be installed from either of the manufacturers, "Sachs" or "LuK".
Clutch makes can be differentiated with transmission installed as follows:
-
Remove center noise insulation - 1 through 3 -.
Some recesses - arrows - are located between engine - A - and transmission - B - in lower area of engine oil pan.
-
Through these recesses, inspect outer contour of flywheel.
-
The outer contour of flywheel can also be inspected by removing small cover plate - A -.