A3 L4-2.0L Turbo (BPY) (2006)
![background image](/audi/a3/l4-2.0l_turbo_(bpy)/Page-3253001.png)
Wheel Bearing: Removal and Replacement
Wheel Bearing Unit
Wheel Bearing Unit
Special tools, testers and auxiliary items required
‹› Torque Wrench (VAG 1332)
Removing
-
Remove drive axle. Refer to => [ Drive Axle, Bolted Inner Joint ] See: Axle Shaft Assembly/Constant Velocity Joint/Service and Repair/Removal
and Replacement/Drive Axle, Bolted Inner Joint.
-
Remove brake caliper and suspend from body with wire.
-
Remove ABS speed sensor.
-
Remove disc brake.
-
Remove bolts - arrows -.
-
Remove wheel bearing unit from wheel bearing housing.
CAUTION.
‹› Avoid contaminating with dirt and damaging the seal when setting down/storing.
The wheel bearing - 1 - must always face up.