A3 L4-2.0L Turbo (BPY) (2006)
![background image](/audi/a3/l4-2.0l_turbo_(bpy)/Page-3255003.png)
‹› Twelve-point bolt = 70 Nm plus an additional 90° turn
‹› Loosening and tightening the twelve-point bolt, refer to => [ Drive Axle Twelve-Point Bolt, Loosening and Tightening ] See: Axle Shaft
Assembly/Service and Repair/Procedures/Rear Suspension/Drive Axle Twelve-Point Bolt, Loosening and Tightening
‹› Before installing, clean the threads in the constant velocity joint with a tap.
20 - Wheel Bearing Unit
‹› The ABS sensor ring is installed in the wheel bearing unit
‹› Removing and Installing, refer to => [ Wheel Bearing Unit ] See: Wheel Bearing Unit
‹› The wheel bearing unit is maintenance free and has zero play. Adjusting and servicing is not possible.
21 - Bolt
‹› 10 Nm
22 - Cover Plate