A3 L4-2.0L Turbo (BPY) (2006)
CAUTION!
Wear protective gloves!
-
Heat inner race of tapered roller bearing to 100 °C / 212 °F before pressing on.
Pulling Off Inner race for Tapered Roller Bearing
A Puller (Kukko 18/1)
B Separating Device 12 to 75 mm (Kukko 17/1)
Transmission with Right Stub Shaft: Pressing On Tapered Roller Bearing Inner Race
-
Place the Thrust Piece (VW 473), with the smaller outer diameter, onto the inner race for tapered roller bearing.
‹› It must be possible to lightly rotate the cage with the tapered rollers when pressing in
Transmission with Right Flange Shaft: Pressing On Inner Race/Tapered Roller Bearing