A3 L4-2.0L Turbo (BPY) (2006)
Shift Cable: Description and Operation
Plastic Relay Lever
From 05.2007 - Plastic Relay Lever
‹› To remove the relay lever, the cable retainer must be disconnected from the selector cable.
This prevents damage to the selector cable.
-
Pull the securing mechanism forward as far as the stop in the direction of - arrow 1 - and then unlock to the left in the direction of - arrow 2 -.
-
Press the relay lever forward (- direction of arrow 3 -).
Relay lever with tab - arrow 1 - (see previous illustration)
-
Press the tab - arrow 1 - (see previous illustration) down as far as the stop and remove the relay lever together with the cable retainer. Move it in
the operating direction when doing so.