A3 L4-2.0L Turbo (BPY) (2006)
Shifter M/T: Service and Repair
Separate Shift Lever Boot From Shift Knob
Separate Shift Lever Boot from Shift Knob
-
Remove the shift knob and the shift lever boot. Refer to => [ Shift Knob with Shift Lever Boot ] See: Shift Knob with Shift Lever Boot.
-
Remove the shift lever boot frame from the center console cover - arrows -.
-
Score the connecting piece at the point marked by the - arrow - using a sharp knife.
-
Then bend connecting piece open, spread it apart and remove it.
Assembling
Install in reverse sequence; note the following points:
-
Attach the shift lever boot with the new connecting piece - arrow - to the shift knob.
-
Install the shift knob and shift lever boot. Refer to => [ Shift Knob with Shift Lever Boot ] See: Shift Knob with Shift Lever Boot.