A3 L4-2.0L Turbo (BPY) (2006)
/Page-3317003.png)
-
Open wiring guide bracket - arrows -.
-
Cut cable ties - 1 - and press electrical wires to side.
-
Unclip wiring guide.
-
Remove bolts - 1 - and remove transmission mount - A -.
Installing
‹› Tightening specifications. Refer to => [ Subframe Mount Assembly Overview ] See: Subframe Mount Assembly Overview.
Install in reverse order, paying attention to the following:
-
Install transmission mount - A - on long member.